Air Motors, Series P1V-A

P1V-A is a range of reversible air motors intended for heavy and

demanding applications. The motor housings are made from

painted cast iron, and the components sealed to permit operation

in damp and dirty environments.

The range contains three different sizes, P1V-A160, P1V-A260

and P1V-A360, with power ratings of 1600, 2600 or 3600 Watts.

The basic motors can be supplied with built-in gearboxes, either

planetary, helical or worm drive, to provide the correct speed of

rotation and torque, and the correct installation mountings.

Basic motor

standard, which gives the motors very good starting and low

speed running characteristics. They are also equipped with

vanes for intermittent lube-free operation as standard. 100%

struction of the motors makes them very reliable, with long service

life and they are easy to service.

Motors with planetary gears

A P1V-A combined with a planetary gear has small installation

dimensions, low weight in relation to performance, free installation

position, flange mounting as standard, in line output shaft

and high efficiency. They are available with shaft speeds ranging

from 95 rpm to 1200 rpm, with torques ranging from 16 Nm

to 160 Nm.

Motors with helical gears

A P1V-A combined with a helical gear has high efficiency, simple

installation with flange or foot, and competitive pricing. They

are available with shaft speeds ranging from 25 rpm to 1050

rpm, with torques ranging from 23 Nm to 1800 Nm. Oil-bath

gears mean that the installation position must be decided beforehand.

The installation position governs the amount of oil in

the gear and the location of filling and drain plugs.

Motors with worm gears

A P1V-A combined with a worm drive gear has the following

characteristics: gearboxes with high gear ratios are self-locking,

which means that they can be used to maintain the output shaft

in position, simple installation with the flange on the left or right

sides or with a foot, small installation dimensions and competitive

pricing. They are available with shaft speeds ranging from

62 rpm to 500 rpm, with torques ranging from 38 Nm to 670 Nm.

Oil-bath gears mean that the installation position must be decided

beforehand. The installation position governs the amount

of oil in the gear and the location of filling and drain plugs.